Hesai JT128 – side connector
Compact hyper-hemispherical 3D LiDAR from Hesai with a 360° × 189° all-around view and 128 channels. For autonomous robotics, SLAM and industrial applications. Cable exits at the side – for flat installations and mounting with little height.
Also available with bottom connector →
Hesai JT128 with side connector at a glance
In this version of the Hesai JT128 the cable leaves the housing at the side. The sensor can therefore sit directly on a flat surface – a robot deck, a vehicle roof or a mounting plate – without a hole or cable feed-through underneath; the cable is routed away sideways.
Choose the side connector when there is little space below the sensor or a feed-through is not possible. For mast, pole or bracket mounting with the cable routed inside, the bottom-connector version is the better fit. Sensor, field of view, data and price are the same for both versions.
The Hesai JT128 is a particularly compact mini 3D LiDAR with a hyper-hemispherical field of view of 360° × 189° — practically without any blind spot. With 128 channels and high point density, it also captures thin objects, low-reflectivity surfaces and complex scenes in fine detail.
At around 265 g and very compact dimensions (Ø 62.5 × 73 mm), the JT128 is ideal for mobile robots, AMRs and tight installation spaces. The high point rate enables fast SLAM mapping and reliable obstacle detection at close range.
Hesai JT128 – side connector: typical applications
- Flat mounting on robot decks, vehicle roofs and mounting plates
- Installation without a cable feed-through in the mounting surface
- Retrofits with little installation height
- Autonomous mobile robots (AMR) and service robotics
- SLAM mapping and localization at close range
- Obstacle detection without blind spots
- Industrial 3D capture in tight installation spaces
Hesai JT128 – side connector: technical specifications
Hesai JT128 – side connector: frequently asked questions
How much does the Hesai JT128 with side connector cost?
The Hesai JT128 with side connector costs €1,100.00 net (€1,309.00 incl. 19% German VAT). Shipping: €25 net within Germany (DHL Express €65), €50 net to other EU countries, €75 net to the rest of Europe outside the EU.
Is the Hesai JT128 with side connector in stock?
Yes, the Hesai JT128 with side connector is in stock in Geretsried, Germany and usually ships within about 48 hours.
Can I buy the Hesai JT128 with side connector on invoice?
In Germany, yes: business customers (B2B) pay on invoice within 14 days; we ship immediately. For other EU countries we decide per order between invoice (14 days) and advance payment by bank transfer and confirm it by email. Deliveries to European countries outside the EU (e.g. UK, Switzerland, Norway) are advance payment only; we ship once payment has arrived. You always receive a proper German invoice — with 19% German VAT, or without VAT for business customers in other EU countries with a valid VAT ID and for exports outside the EU.
How do warranty and repairs work for the Hesai JT128 with side connector?
You receive original goods with a proper German invoice. We handle the statutory warranty as the seller — if something is wrong, your contact is in Geretsried, Germany. Manufacturer service and repairs run through the service centres designated by the manufacturer.
Do customs or import fees apply when ordering the Hesai JT128 with side connector?
Not within the EU: we ship from our warehouse in Geretsried, Germany, and there is no customs clearance inside the EU single market. Special territories outside the EU VAT area (Canary Islands, Ceuta and Melilla, the French overseas departments) are the exception — we deliver there on request only. Businesses in other EU countries with a valid VAT ID receive a VAT-exempt intra-Community supply (0%); otherwise 19% German VAT applies. To European countries outside the EU (e.g. UK, Switzerland, Norway) we ship as a VAT-exempt export (€75 net shipping, advance payment, delivery term DAP): customs duties, import VAT and any clearance fees are paid by the recipient. Delivery inside Germany typically takes 2–3 business days via DHL.
What is the Hesai JT128 with side connector used for?
Typical applications include flat mounting on robot decks, vehicle roofs and mounting plates; installation without a cable feed-through in the mounting surface; and retrofits with little installation height.
Which connector versions does the Hesai JT128 come in?
The JT128 is available with the cable exiting at the bottom – e.g. for mast or bracket mounting with a cable feed-through – and with the cable exiting at the side for flat installations with little height. Sensor, data and price are identical.
Your Hesai model is not listed in the shop?
No problem: we are also a specialist dealer for Hesai LiDAR. Models not listed in the shop – e.g. from the Hesai XT, QT, OT or AT series – and matching accessories can be sourced on request; we will send you a quote with price and lead time. Email info@livoxtech.de or call +49 8171 31550.